Tyco MX T2000-Fire Panel (557.200.600)

Categories: Fire Detection, Fire Panels & Repeater Panel SKU:

Tyco MX T2000 – Fire Panel (557.200.600)

Features:

  • Enhances fire detection and eliminates unwanted alarms using “fuzzy logic”
  • Assists fire fighting and training by providing on-screen risk management information
  • Helps fire crews by giving smoke density and temperature readings in the affected areas
  • Simplifies maintenance by pin-pointing faults
  • Enables remote fault finding to be carried out
  • Flexible interfacing with graphic management systems

MINERVA® Marine Panel Range

MINERVA® MX is a comprehensive range of fire controllers designed and built to BSEN ISO9001/2 and EN54. An advanced proven microprocessor based system, MINERVA® MX provides conventional and digital addressable detection for new, refurbished and refitted detection systems. A wide range of detectors and ancillaries makes MINERVA® MX suitable for applications from general cargo vessels to large passenger vessels and offshore installation.

T2000

  • The T2000 panels are intelligent EN54 approved and marine approved sub-panels, which can be networked.
  • A test report detailing compliance to naval test requirements for Shock , Vibration & EMC (NES814 , NES 1004 Iss 2 & DefStan 59-41) is available .
  • The panel can also be ordered with a factory test certificate and label which references this test report.
  • The T2000 panel is supplied with 2 loops and is expandable to eight loops using additional loop expansion cards.
  • The panel will support up to 1000 addressable devices.
  1. The PSB800MK power expansion kit can provide additional power for the extra loops.
  2. The panel consists of a strong stainless steel or mild steel enclosure containing:
  3. PSB800 5A 24Vd.c. battery backed power supply and loop booster to EN54:pt.4 •
  4. FIM800 field interface PCB incorporating two MX DIGITAL loops
  5. CPU800 32 bit processor and memory card
  6. Optional network card, additional loop card(s) and remote diagnostic modem
  7.  Optional IOB800 input/output expansion card mounted on the PSB800

 

For more information please contact us.

 

Characteristics

Meausured value: Application domain:

Tyco T2000 – Description

  • The T2000 panels are intelligent EN54 approved and marine approved sub-panels, which can be networked.
  • A test report detailing compliance to naval test requirements for Shock , Vibration & EMC (NES814 , NES 1004 Iss 2 & DefStan 59-41) is available .
  • The panel can also be ordered with a factory test certificate and label which references this test report. The T2000 panel is supplied with 2 loops and is expandable to eight loops using additional loop expansion cards.
  • The panel will support up to 1000 addressable devices.The PSB800MK power expansion kit can provide additional power for the extra loops.
  • The panel consists of a strong stainless steel or mild steel enclosure containing:
  1. PSB800 5A 24Vd.c. battery backed power supply and loop booster to EN54
  2. FIM800 field interface PCB incorporating two MX DIGITAL loopsCPU800 32 bit processor and memory card Optional network card,
  3. Additional loop card(s) and remote diagnostic modem
  4. Optional IOB800 input/output expansion card mounted on the PSB800

Technical Specifications :

Mechanical

  • Dimensions (WxHxD)  : Controller 440 x 320 x 135mm
  • Colour : Dawn Grey (Housing) Pantone – 431C (Modules)
  • Installation  : Surface or Semi-flush Mounted

Environmental

  • Operating Temp. Range : (- 8)°C to + 55°C
  • Storage Temp. Range : (-20) °C to + 70°C
  • Humidity : Up to 95% RH (Non-condensing)
  • Housing Protection To :  IP42

Electrical

  • Mains Supply 120V-240Vac + 10% / -15% at 50/60Hz
  • Secondary Supply 24V d.c. Nominal

T2000R CV Indicating Repeater

  • Input Voltage 24V d.c. Nominal

Input

  • T2000 Panel
  • No. of Loops : 2, expandable to 8
  • Addresses per panel 1000 Max
  • T2000CV Panel
  • No. of Loops :  3
  • Addresses per panel 750 Max

Output

  • T2000 Panel & T2000CV
  • Display : 240 Zone 16 x 40 Character
  • Sounder :  There are two separate monitored sounder outputs each rated at 2A.
  • Alarm Fire _ Relay output rated at 30V d.c. at 1.0A volt free c/o. Fault _ Relay output rated at 30V d.c. at 1.0A volt free c/o.

Detector Bases

  • 801IB : Isolator Base
  • 801RB : Relay Base
  • 802SB : Loop Powered Sounder Base
  • 5B :  5” Universal Base

Command Modules

  • SNM800 : Sounder Module
  • RIM800 : Relay Module
  • CIM800 : Contact Monitor Module
  • SB520 : Sounder Booster Module
  • TM520 : Timer Module
  • DIM800 : Conventional Detector Module
  • APM800 : Power Supply Monitor Module
  • MIM800 : Mini Input Module
  • CP820M : Indoor Callpoint
  • CP830M : Outdoor Callpoint
  • MIO800 : Multi-Input Output Module 8 Loop Support (T2000 Only)
  • SB800MK 8 : Loop Power Expansion Kit
  • XLM800 : Loop Expansion Card (Loops) T2000 8

To order the Tyco MX T2000 Fire panel , please contact us on below address :

Email : info@shipautomation.com
Tel : +91 9624 424242

  • Wong Yee

    I have been communicating with Mr Sagar for my technical needs. He has been fair, understanding and accommodating towards my inquiries. I look forward to more future dealings with him

  • Tech Nik

    Have been using their supply so far for our vessels, so far the item is good and some obsolute item could be found by them.

  • Vinod Kaimal

    We had been dealing with M/s Ship Automation for the ship automation and electrical spares for over 3years now....Always had a good experience throughout the purchase process! The parts offered are of superior quality and arrive promptly! We will continue to have M/s Ship Automation as our partner in spare part supplies....Rgds, Vinod Kaimal - Vibspectrum International LLC-Dubai

  • CHB

    We have been dealing with Mr. Manan! Excellent cooperation and all items purchased are packaged professionally and arriving in time and in good working condition! Rare to find a shop in India dealing in such a good way!

we will get back to you within 24 hrs | We respect your privacy